|
|
| |
| Standard
multi way wire - and cable drum types |
|
Body and centre of the drums are made of parallel
or spirally wound and multiple times glued
kraft paper and / or wrapped cardboard. Tension
ring, top- and bottom ring are made of galvanized
steal rim. The bottom is made of compounded
materials, hard fibre materials or plywood.
The lid is made by customer's choice out of
plastic, galvanized sheet metal, plywood or
hard fibre material. |
|
 |
|
| Standard sizes, other sizes on request. |
| Heights are made by customer's choice
from 200 mm up to 1000 mm. |
| Standard
sizes (table) |
 |
| Top-
and bottom ring |
|
| Wire
drum type DTR |
 |
Normal
drum type NTR |
 Top
ring lying inside and crimped. Insert: for blank round
wire.
|
|
 Top
ring lying outside, crimped and pressed. Insert: for insulated
round wire |
|
|
|
| Special
drum type STR |
|
Special
drum type STR type II |
 Double
top ring, crimped. If necessary glued or riveted to the
body of the drum. Insert for copper or brass welding wire. |
|
 Jumbo
drum; Rolled top rings, lying outside, screwed on the
drum. Insert for thin-walled pipes or heavier wire diameters. |
|
| Bottom
varieties |
|
| Solid
formed bottom |
|
Solid
formed bottom ring |
 Made
of solid pressed compound material. Inner core is glued. |
|
 Inner
core is tacked on. |
|
|
|
| Hard
fibre or plywood bottom |
|
Wooden
bottom with groove |
 with
tension ring; inner core is glued |
|
 Jumbo
drum; with wooden legs to move underneath with a forklift;
inner core is glued |
|
| Lid
varieties |
|
| Laid-on
hard fibre lid |
|
Polypropylene
lid |
 On
customer's request it is possible to put a round tension
ring on the hard fibre - or plywood lids, to stabilize
the inner core even more. |
|
 laid-on |
|
|
|
| Galvanized
sheet-steel |
|
Plywood
lid with rubber seal |
 galvanized |
|
 with
rubber seal |
|
| Varieties
of handles, riveted, screwed or pinned |
| On customer's
request possible as disposable friendly type |
| With
light handles |
|
With
heavy handles |
|
Special
type |
 |
|
 |
|
handle welded on the tension ring |
|
| Drum
bodies |
|
| Individual
design |
 |
Individual
design by lacquering, labelling or printing, inner lacquering
prevents corrosion |
 |
|
|
|
| with
inspection slits |
|
with
window |
 With
double-rowed inspection slits, offset positioned; filling
level display |
|
 With
transparent glued-over view window; with controlling display
for rest amounts; Metal parts are glued-over, to avoid
the wire to get hooked in the filling body. |
|
| Core
centre (inner cylinder) |
|
| with
top ring |
|
with
turned-over upper rim |
 with
top ring made of galvanized sheet-steel, crimped |
|
 with
turned-over upper rim |
|
|
|
| with
two longitudinal slits facing one another |
 Bottom
with traction rubber band and metal rod. With two holes
at the upper and lower edge to arrest the beginning or
end of the wire. |
|
| Others |
|
 sheet
to press on, to secure transport and take the wire smoothly
out,
hood for wire pull for the Ø 500 / 510 / 550 /
580 / 650 mm,
wire tube,
stamped cardboard pieces for protection or dividing function |
|
| One-way
standard wire and cable drums |
|
Body and centre of the drum are made of parallel
or spiral wound and multiple times glued craft
paper and / or wrapped cardboard. |
| ·
Standard measurements |
| · Inner
diameter of the drum body is available
from a Ø of 300 mm up to 800 mm and
the centre (inner core) in a Ø range
from 130 mm up to 315 mm. |
| ·
Other measurements can be inquired.
Heights range from 200 mm to 1200 mm. |
|
 |
|
|
| Varieties
of the bottoms from a Ø 300 mm up to 400 mm |
|
| Cardboard
bottom with a hole |
|
Round
cardboard disc |
 drum
body and -centre tacked on a round cardboard disc |
|
 drum
body tacked on the cardboard bottom, bottom ring tacked
on core centre and glued with the cardboard bottom |
|
|
|
| Reinforcement
of the cardboard bottom by small wooden blocks |
 Reinforcement
of the cardboard bottom by small wooden blocks |
|
| Varieties
of the bottoms with a Ø of 450 mm up to 800 mm |
|
| Solid
Form body |
|
Form
bottom ring |
 made
of compounded material with a rubber tension device |
|
 Form
bottom ring |
|
|
|
| Hard
fibre bottom |
|
Plywood
bottom |
 with
tension ring |
|
 with
a groove |
|
|
|
| Cardboard
bottom |
|
Cardboard
lid press-in |
in different types and inner part with rubber tension
ring |
|
 with
or without a hole to grab on |
|
|
|
| Cardboard
lid press-in |
|
|
 with
a wooden cross enforcement |
|
|
|
| Varieties
of the lid with a Ø ranging from 450 to 800 mm |
|
| Hard
fibre lids |
|
Hard
fibre lids |
 lying
inside with a hole (50 mm) to grab on |
|
 lying
inside with a wooden cross enforcement |
|
|
|
| Cardboard
or hard fibre lid |
|
Cardboard
lid to press-in |
 to
press-in with a lifting ring |
|
 with
a tension ring (narrow type) |
|
|
|
| Hard
fibre lid |
|
Cardboard
top to clap-on |
 with
special tension ring (wide type) |
|
 Cardboard
top to clap-on |
|
| Stamped
out holes for the side handles |
|
| length 300
mm, width 100 mm |
 |
|
| Varieties
of the handles |
|
| Ø
300 mm up to 400 mm |
|
Ø
450 mm up to 800 mm |
 simple
wire handle type, thickness of the wire is 2,8 mm |
|
 simple
wire handle type, thickness of the wire is 3,8 mm |
|
|
|
|
with light handles (riveted or screwed) |
|
with
heavy handles (riveted or screwed) |
Load
on the handles
Deforming from 240 kg on; Tear off at 470 kg; Light type
without counter sheet |
|
Load
on the handles
Deforming from 240 kg on; Tear off at 940 kg; Heavy type
with normal or enlarged counter sheet |
|
|
|
|
| Special
types |
|
| Drum
body |
 with
top and / or bottom enforcement ring which is lying on
the outside, made of cardboard for wire drums with high
strain
Form bottom with rubber tension device
and metal rod for transport security |
| With
cardboard support |
| (as
press-on or intermediate ring) wire pressure plate for
smooth wire take out, hood to take out the wire |
  |
| Fibre
drums F / PE |
|
Fibre
drums H / H |
 the
bottom is made of laminated kraft paper or hard fibre
and solid plastic
( polyethylene) lid with tension ring lock
diameter Ø 250, 315,
355, 380, 400, 420, 450, 500, 560, 571, 5, 580 und 630
mm |
|
 the
bottom and lid are made of plywood, the lid comes with
rubber seal and tension ring lock
diameter Ø 250, 315,
355, 380, 400, 420, 450, 500, 560, 571, 5, 580 und 630
mm |
|
|
|
|
Fibre drums F / HF |
|
Fibre
drums F / F |
the
bottom is made of laminated kraft paper or hard
fibre and the lid is made of hard fibre in two different
thicknesses with tension ring lock.;
diameter Ø 250,
315, 355, 380, 400, 420, 450, 500, 560, 571,5, 580,
und 630 mm |
 |
with
bottom and lid are made of laminated kraft paper
and tension ring lock;
diameter Ø 400
mm |
|
|
|
|
| Fibre
drums B / B |
|
Fibre
drums F / B |
fibre
drums with bottom and lid made of galvanized sheet
steel with tension ring lock; outer lacquer and
inner cover-up possible
diameter Ø 315,
355 und 400 mm
|
 |
the
bottom is made of laminated kraft paper or hard
fibre and the lid is made of galvanized sheet steel
with tension ring lock;
diameter Ø 315,
355, 380, 400, 420, 450, 500, 560, 571,5 mm |
|
|
|
